Kout Deskripsyon:


pwodwi Detay

pwodwi Tag

Related Video

Feedback (2)

It adheres for the tenet "Honest, industrious, enterprising, innovative" to develop new products and solutions continuously. It regards shoppers, success as its individual success. Let us produce prosperous future hand in hand for Steel Plate , Welded Tube , Welding Square Pipe , We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.We strongly believe that we can do better and better.


Product detail pictures:




Related Product Guide:
Buying Stainless Steel Coils
The Benefits of Using Steel Pipes

It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for TOP 500 MANUFACTURING ENTERPRISE, The product will supply to all over the world, such as: British , Namibia , Finland , With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in public placesand other industries. Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success!
  • Previous:
  • Next:

  • Interested in A Career In Welding? Click Here:

    Invertig 221 by HTP:

    Steel Provided Courtesy of Metal Supermarkets:

    Subscribe for more Crafty Videos!
    More Simple Sewing Tutorials

    Follow me on Social!

    Snapchat: MelanieKHam

    PLEASE READ: I serged my seam on the inside of my pillow to keep it from fraying. You may also zig zag. Also, no need to clip your corners on this project ;)

    Check out my blog post about it!

    Main fabric (mine is from Joann fabrics in the upholstery section – Nate Berkus
    binding fabric – Kona Cotton 1/2 yard
    6/32 cotton cording or something similar


    rotary blade and mat

    sewing machine and coordinating thread

    iron/ironing board


    16 inch pillow form
    (1) 17 x 17 inch for front panel
    (2) 17 x 12 for back panels
    73 inches of bias binding – Add all four sides and add 5 inches.

    14 inch pillow form
    (1) 15 x 15 inch front panel
    (2) 15 x 11
    65 inches of bias binding – Add all four sizes and add 5 inches

    20 inch Pillow form
    (1) 21 x 21 inch fron panel
    (2) 21 x 14 for back panels
    89 inches of bias binding

    Written Instructions:
    Prewash and iron fabric
    Cut out fabric pieces to specified size
    Take the back 2 pieces to the ironing board and iron the longer (horizontal) edge over 1/4 and again 1/4 inch to prepare for sewing. (:52)
    Sew down both seams that you just pressed with a coordinating thread about 1/8 away from the edge.(1:00)
    Take our fabric for your binding and make straight edges. Mine was 1/2 yard. (1:09)
    Take the selvedge edge of the fabric and fold it diagonally so that it lines up with the straight edge of our fabric (1:25)
    -the diagonal fold is the bias. It gives the binding more give and stretch to get around the corners.
    Fold the bias edge on top of itself 2 times keeping the folded edge lined up (1:45)
    Turn fabric so that your folded bias edge is on the right had side and trim the fold to create a straight edge (2:12)
    Flip that cut edge to the left side of the mat and using the ruler, make 3 cuts or however many you need to get appropriate bias binding size (2:20)
    Trim all bias strips so that it is a straight rather than diagonal edge (3:00)
    Join all bias binding strips with a bias join (3:14)
    Fold the end of the bias strip about 3/4 inch and place your cording inside (4:01)
    Fold the strip with the cording inside, matching up the raw edges and pin in place (4:08)
    Using a zipper foot or cording foot, sew a stitch as close to the cording as possible using a thread that blends with your fabric, back stitch on both ends (4:12)
    Attach the binding to the front square of the pillow pieces with pins very well.. (4:53)
    Match up the raw edges and put small cuts in the cording tape to go around the corners. (4:57)
    Trim end of the piping and place inside the fold from the beginning of the piping to conceal the end. (5:35)
    Using the zipper foot, sew the pinned piping to the front panel of the pillow back stitching at beginning and end.. Go slow around the corners.(5:53)
    Place front panel right side facing up and take the first back panel and lay the right side down (right sides together). The finished seam should be in the center of the pillow, raw edges should be matched up on the outside. Place 2nd back panel on top of the first, right side down with the seam toward the center and the raw edges matching on the outside edge. (6:56)
    Pin in place (7:10)
    Sewing all the pieces together with the zipper foot. Seam allowance should be between 1/2 and 5/8 inch. Remove pins as you go, and go slow around the corners. Back stitch at front and back as well as the openings. (7:21)
    To make your pillow more washer friendly, serge or zig zag stitch your inside seam. No need to clip the corners.
    You are done!

    *This contains affiliate links, THANK YOU for the support in this way! I receive a small % if you purchase the items I have linked, plus it makes it easy for you to find ;) .

    As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
    5 StarsBy Denise from Iran - 2016.09.30 16:36
    We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 StarsBy Muriel from Iran - 2015.11.28 16:25

    pwodwi ki gen rapò

    WhatsApp Online Chat !