Fabricator tubi metallici cavae sectionis structuralis 1000*1000*40MM

Sectio structurae cavae 1000*1000*40MM, fabricator tubi metallici, Imago Praecipua
  • Fabricator tubi metallici cavae sectionis structuralis 1000*1000*40MM
  • Fabricator tubi metallici cavae sectionis structuralis 1000*1000*40MM
  • Fabricator tubi metallici cavae sectionis structuralis 1000*1000*40MM
  • Fabricator tubi metallici cavae sectionis structuralis 1000*1000*40MM
  • Fabricator tubi metallici cavae sectionis structuralis 1000*1000*40MM

Descriptio Brevis:

Una sumus ex tribus officinis praestantissimis mundi, in productione sectionum structuralium cavarum (tubi quadrati et tubuli rectangulares) specializata.

  • Crassitudo:0.5 - 60 mm
  • Diametros exterior (OD):quadratum: 10*10mm-1000*1000mm rectangulum: 10*15mm-800*1100mm
  • Ars:ERW, LASW, SINE CONSUTURA
  • Certificatio:CE, LEED, BV, PHD et EPD, BC1, EN 10210, EN10219, ISO9000, ASTM A500, ASTM A501, JIS G3466, AS1163
  • Curatio Superficiei:niger vel galvanizatus vel ad mensuram
  • Longitudo:0.5-24M secundum requisitum clientis
  • Normae:ASTM A500/A501, EN10219/10210, JIS G3466, GB/T6728/3094 AS1163, CSA G40.20/G40.21
  • Materiae:Gradus A/B/C, S235/275/355/420/460, A36, SS400, Q195/235/355, STKR400/490, 300W/350W
  • Quantitas minima (MOQ):Duae ad quinque tonnae
  • Tempus Traditionis:Dies VII-XXX
  • Modus solutionis:TT/LC
    • Deprime ut PDF

    Detalia Producti

    QUALITATIS CONTROLUS

    RESPONDE

    VIDEO CONNEXUM

    Etiquettae Productarum

    https://www.ytdrintl.com/group-introduction/

    Tubus quadratus magni diametri, tubus ferreus cumsectio cava, magna copia constructionis, fabricationis machinarum, operum constructionis ferreae, navium aedificatio, fulcra generationis energiae solaris, machinationis structurae ferreae, machinationis potentiae, stationis electricae, machinarum agriculturae et chemicae, muri vitrei, chassis autocinetorum, aeroportus, etc. Comparata cum ferro rotundo et alio ferro solido,fistula ferreaEandem vim flexionis et torsionis necnon leve pondus habet. Genus est chalybis sectionis transversalis oeconomici, late adhibitum in fabricatione partium structuralium et mechanicarum.

    Specificatio sectionum cavarum quadratarum et rectangularium

    OD(MM) CRASSITAS (MM) OD(MM) CRASSITAS (MM) OD(MM) CRASSITAS (MM) OD(MM) CRASSITAS (MM)
    XX*XX 1.3 60*120 80*100 90*90 1.50 CLXXX*CLXXX Tres 300*800 400*700 550*550 500*600
    1.4 1.70 3.5-3.75 9.5-9.75
    1.5 1.80 4.5-4.75 11.5-11.75
    1.7 2.00 5.5-7.75 12-13.75
    1.8 2.20 9.5-9.75 XV-L
    2.0 2.5-4.0 11.5-11.75
    20*30 25*25 1.3 4.25-4.75 12.0-25.0
    1.4 5.0-6.3 100*300 150*250 200*200 2.75 300*900 400*800 600*600 500*700
    1.5 7.5-8 3.0-4.0 9.5-9.75
    1.7 50*150 60*140 80*120 100*100 1.50 4.5-9.75 11.5-11.75
    1.8 1.70 11.5-11.75 12-13.75
    2.0 2.00 12.5-12.75 XV-L
    2.2 2.20 13.5-13.75
    2.5-3.0 2.5-2.75 15.5-30
    20*40 25*40 30*30 30*40 1.3 3.0-4.75 150*300 200*250 3.75 300*1000 400*900 500*800 600*700 650*650
    1.4 5.5-6.3 4.5-4.75
    1.5 7.5-7.75 5.5-6.3 9.5-9.75
    1.7 9.5-9.75 7.5-7.75 11.5-11.75
    1.8 11.5-16 9.5-9.75 12-13.75
    2.0 60*160 80*140 100*120 2.50 11.5-11.75 XV-L
    2.2 2.75 13.5-30
    2.5-3.0 3.0-4.75 200*300 250*250 3.75 400*1000 500*900 600*800 700*700
    3.25-4.0 5.5-6.3 4.5-4.75
    25*50 30*50 30*60 40*40 40*50 40*60 50*50 1.3 7.5-7.75 5.5-6.3 9.5-9.75
    1.4 9.5-16 7.5-7.75 11.5-11.75
    1.5 75*150 2.50 9.5-9.75 12-13.75
    1.7 2.75 11.5-11.75 XV-L
    1.8 3.0-3.75 12-13.75
    2.0 4.5-4.75 15.5-30
    2.2 5.5-6.3 200*400 250*350 300*300 4.5-6.3 500*1000 600*900 700*800 750*750
    2.5-3.0 7.5-7.75 7.5-7.75 9.5-9.75
    3.25-4.0 9.5-16 9.5-9.75 11.5-11.75
    4.25-4.75 80*160 120*120 2.50 11.5-11.75 12-13.75
    5.0-5.75 2.75 12-13.75 XV-L
    5.75-6.3 3.0-4.75 15.5-30
    40*80 50*70 50*80 60*60 1.3 5.5-6.3 200*500 250*450 300*400 350*350 5.5-6.3 500*1100 600*900 700*800 750*750
    1.5 7.5-7.75 7.5-7.75 9.5-9.75
    1.7 9.5-9.75 9.5-9.75 11.5-11.75
    1.8 11.5-20 11.5-11.75 12-13.75
    2.0 100*150 2.50 12-13.75 XV-L
    2.2 2.75 15.5-30
    2.5-3.0 3.0-4.75 280*280 5.5-6.3 600*1100 700*1000 800*900 850*850
    3.25-4.0 5.5-6.3 7.5-7.75 9.5-9.75
    4.25-4.75 7.5-7.75 9.5-9.75 11.5-11.75
    5.0-6.0 9.5-9.75 11.5-11.75 12-13.75
    40*100 60*80 70*70 1.3 11.5-20 12-13.75 XV-L
    1.5 100*200 120*180 150*150 2.50 15.5-30
    1.7 2.75 350*400 300*450 7.5-7.75 700*1100 800*1000 900*900
    1.8 3.0-7.75 9.5-9.75 11.5-11.75
    2.0 9.5-9.75 11.5-11.75 12-13.75
    2.2 11.5-20 12-13.75 XV-L
    2.5-3.0 100*250 150*200 3.00 15.5-30
    3.25-4.0 3.25-3.75 200*600 300*500 400*400 7.5-7.75 800*1100 900*1000 950*950
    4.25-4.75 4.25-4.75 9.5-9.75 11.5-11.75
    5.0-6.3 9.5-9.75 11.5-11.75 12-13.75
    50*100 60*90 60*100 75*75 80*80 1.3 11.5-11.75 12-13.75 XV-L
    1.5 12.25 15.5-40
    1.7 140*140 3.0-3.75 300*600 400*500 400*400 7.5-7.75 900*1100 1000*1000 800*1200
    1.8 4.5-6.3 9.5-9.75
    2.0 7.5-7.75 11.5-11.75 XX-LX
    2.2 9.5-9.75 12-13.75
    2.5-3.0 11.5-25 15.5-40
    3.25-4.0 160*160 3.00 400*600 500*500 9.5-9.75 1100*1000 1100*1100
    4.25-4.75 3.5-3.75 11.5-11.75 XX-LX
    5.0-5.75 4.25-7.75 12-13.75
    7.5-8 9.5-25 15.5-40

    COMMODA PRODUCTI

    01 PACTUM DIRECTE

        In rebus specialibus specializati sumus

    Tubos ferreos per XXI annos producens

    commodum-tubi-quadrati_03
    commodum-tubi-quadrati_04
    • 02 COMPLETUM
    • SPECIFICATIONES

      Diametros exterior: 10*10-1000*1000MM 10*15-800*1100MM

    Crassitudo: 0.5-60mm

    Longitudo: 1-24M

    3 CERTIFICATIO EST
    COMPLETUM
    potest producere producta tuborum ferreorum mundi
    norma, qualis est norma Europaea, norma Americana,
    Norma Iaponica, norma Australiana, norma nationalis
    et cetera.

    commodum-tubi-quadrati_07
    commodum-tubi-quadrati_08

    04 INVENTARIUM MAGNUM
    Specificationes communes inventarii perennis
    Viginti milia tonnarum

    PRODUCTA CALIDA

    CERTIFICATUM EXHIBITIO

    EXHIBITIO INSTRUMENTORUM

    sex

    LABORATORIUM INDEPENDENS

    VIRES NOSTRAE

    SOLA

    Fabricator tuborum rectangularium inter decem optimas marcas tuborum ferreorum in Sinis electus est.

    quattuor

    PROPORTIO QUALIFICATA PRODUCTORUM >100%

    INVOLUCRUM

    2de70b33c3a6521eefdad7dc10bb9b9
    c0e330415c82735f94d3c25ac387c7d
    f3f479dc4464d16602944db088824e4
    453178610663829382b8b7cbbfe9b9e

    Quaestiones Frequentes

    Q1: Esne societas mercatoria an fabricator?

    A: Officina sumus.

    Q2: Quamdiu est tempus traditionis tuae?

    A: Generaliter quinque ad decem dies sunt si merces in promptu sunt. Vel triginta dies si merces non in promptu sunt, secundum quantitatem.

    Q3: Exempla praebetisne? Gratis an extra?

    A: Ita, exemplum gratis offerre possumus cum sumptu vecturae a cliente soluto.

    Q4: Quae sunt condiciones solutionis tuae?

    A: Solutio <=1000USD, 100% antea. Solutio >=1000USD, 30% T/T antea, reliquum ante navem. Si aliam quaestionem habes, libenter nobiscum communicare potes ut infra.

  • Praecedens:
  • Deinde:

    • Societas magni aestimat qualitatem productorum, magnopere in introductionem apparatuum et peritorum provectorum investit, et omni ope nititur ut necessitatibus clientium domi et in terris externis satisfaciat.
    Contenta grosse dividi possunt in: compositionem chemicam, limitem cessionis, limitem tensile, proprietatem impactus, et cetera.
    Simulenter, societas etiam detectionem vitiorum et recoctionem aliasque curationes caloris in linea secundum necessitates emptorum perficere potest.

    https://www.ytdrintl.com/

    Litterae Electronicae:sales@ytdrgg.com

    Tianjin YuantaiDerun Societas Fabricationis Tuborum Ferreorum, Ltd.officina tuborum ferreorum est ab probataEN/ASTM/ JISin productione et exportatione omnium generum tuborum quadratorum rectangularium, tuborum galvanizatorum, tuborum ERW sudatorum, tuborum spiralium, tuborum arcu submersorum sudatorum, tuborum sutura recta, tuborum sine suturis, spiralium chalybis colore obductarum, spiralium chalybis galvanizatorum, aliorumque productorum chalybis specializata. Cum commoda vectura, 190 chiliometra ab Aëroporto Internationali Capitali Pechinensi et 80 chiliometra a Xingang Tianjin distat.

    Whatsapp: +8613682051821

    Mitte nobis nuntium tuum:

    Nuntium tuum hic scribe et nobis mitte.

    PRODUCTA CONNEXA

    Praesentatio rationum principalium

    • ACS-1
    • cnECGroup-1
    • cnmnimetalscorporation-1
    • crcc-1
    • cscec-1
    • csg-1
    • cssc-1
    • Daewoo-1
    • dfac-1
    • duoweiuniongroup-1
    • Fluor-1
    • structura-chaleis-1
    • samsung-1
    • sembcorp-1
    • sinomach-1
    • SKANSKA-1
    • snptc-1
    • strabag-1
    • TECHnip-1
    • Vinci-1
    • zpmc-1
    • sany-1
    • bilfinger-1
    • Bechtel-1-logo