Sectio cava rectangularis rhs 200x100x3

Sectio cava rectangularis rhs 200x100x3. Imago Praecipua.
  • Sectio cava rectangularis rhs 200x100x3
  • Sectio cava rectangularis rhs 200x100x3
  • Sectio cava rectangularis rhs 200x100x3
  • Sectio cava rectangularis rhs 200x100x3

Descriptio Brevis:

Commodum:
1. Centum per centum post venditionem qualitatis et quantitatis certitudo.
2. Procurator venditionum professionalis celeriter intra horas XXIV respondet.
3. Magna copia magnitudinum regularium.
4. Exemplum gratuitum 20cm altae qualitatis.
5. Magna facultas producendi etceleris traditio.

  • Crassitudo:0.5 - 60 mm
  • Diametros exterior (OD):rectangulum: 10*15 800*1100mm
  • Certificatio:CE, LEED, BV, PHD&EPD,BC1,JIS, ISO
  • Longitudo:1-24M
  • Normae:Sectio cava: ASTM A500/A501,EN10219/10210,JIS G3466,GB/T6728/3094 AS1163, CSA G40.20/G40.21
  • Materiae:Gradus A/B/C, S235/275/355/420/460, A36, SS400, Q195/235/355, STKR400/490, 300W/350W
  • Tempus Traditionis:Dies VII-XXX
  • Modus solutionis:TT/LC
  • Tolerantia:±5% vel prout requiritur
  • Ars:ERW, LSAW, SINE SUTURIS
    • Deprime ut PDF

    Detalia Producti

    QUALITATIS CONTROLUS

    RESPONDE

    VIDEO CONNEXUM

    Etiquettae Productarum

    -2

    Pauca verba a Yuantai Derun Steel Group
    Yuantai Derun, cum productione annua decem milionum tonnarum, est maxima fabricatrix tuborum quadratorum ERW, tuborum rectangularium, tuborum cavorum, tuborum galvanizatorum, tuborum rectorum chalybeorum arcu submerso conglutinatorum et tuborum spiraliter conglutinatorum in Sinis. Venditiones annuae quindecim miliarda dollariorum Americanorum pervenerunt. Yuantai Derun habet quinquaginta novem tubos nigros...Tubus ERWlineae productionis, decemfistula galvanizataLineae productionis et tres lineae productionis tuborum spiraliter conglutinatorum. Tubus quadratus 10 * 10 * 0.5mm ad 1000 * 1000 * 60MM,tubus ferreus rectangulus10 * 15 * 0.5mm to 800 * 1100 * 60MM, straight seam welded steel pipe φ 355.6-2000mm, spiral pipe Φ 219-2032mm, seamless pipe φ 21.3-820mm。 Yuantai Derun can produce square rectangular pipes conforming to ASTM A500, JIS g3466, en10219, din2240 and as1163. Yuantai Derun has the largest square tube inventory in China, which can meet the direct purchase needs of customers. Welcome to contact Yuantai Derun, e-mail: sales@ytdrgg.com , real-time connection factory inspection or factory visit!

    1. Analysis indicis perfunctionisSectio cava rectangularis rhs 200x100x3-plasticitas
    Plasticitas ad facultatem materiarum metallicarum refertur ad deformationem plasticam (deformationem permanentem) sine damno sub onere producendam.
    2. Analysis indicis functionis tubi quadrati - duritia
    Durities est index ad duritiem materiarum metallicarum metiendam. Hodie, methodus mensurae duritiei in productione usitatissima est methodus duritiae indentationis, quae indentatore forma geometrica certa utitur ad superficiem materiae metallicae sub certo onere examinandae premendam, et valorem duritiae secundum gradum indentationis determinat.
    Methodi communes includunt duritia Brinell (HB), duritia Rockwell (HRA, HRB, HRC) et duritia Vickers (HV).
    3. Analysis indicis perfunctionis tubi quadrati - lassitudine
    Robur, plasticitas et duritia supra discussae omnes sunt indicia proprietatum mechanicarum metallorum sub onere statico. Re vera, multae partes machinarum sub onere cyclico laborant, quo in casu fatigatio orietur.
    4. Analysis indicis perfunctionis tubi quadrati - tenacitas impacti
    Onus in machinam magna celeritate agens onus impactus appellatur, et facultas metalli ad damnum sub onere impactus resistendum tenacitas impactus appellatur.
    5. Analysis indicis perfunctionistubus quadratus- robur
    Robur significat facultatem materiarum metallicarum resistendi damnum (deformationem plasticam excessivam vel fracturam) sub onere statico. Cum modi actionis oneris tensionem, compressionem, flexionem, scissionem, etc. includant, robur etiam dividitur in robur tensile, robur compressivo, robur flexionis, robur scissionis, etc. Saepe certa relatio est inter varias vires, et robur tensile plerumque ut index roboris fundamentalissimus adhibetur.

    Specificatio sectionum cavarum quadratarum et rectangularium

    OD(MM) CRASSITAS (MM) OD(MM) CRASSITAS (MM) OD(MM) CRASSITAS (MM) OD(MM) CRASSITAS (MM)
    XX*XX 1.3 60*120 80*100 90*90 1.50 CLXXX*CLXXX Tres 300*800 400*700 550*550 500*600
    1.4 1.70 3.5-3.75 9.5-9.75
    1.5 1.80 4.5-4.75 11.5-11.75
    1.7 2.00 5.5-7.75 12-13.75
    1.8 2.20 9.5-9.75 XV-L
    2.0 2.5-4.0 11.5-11.75
    20*30 25*25 1.3 4.25-4.75 12.0-25.0
    1.4 5.0-6.3 100*300 150*250 200*200 2.75 300*900 400*800 600*600 500*700
    1.5 7.5-8 3.0-4.0 9.5-9.75
    1.7 50*150 60*140 80*120 100*100 1.50 4.5-9.75 11.5-11.75
    1.8 1.70 11.5-11.75 12-13.75
    2.0 2.00 12.5-12.75 XV-L
    2.2 2.20 13.5-13.75
    2.5-3.0 2.5-2.75 15.5-30
    20*40 25*40 30*30 30*40 1.3 3.0-4.75 150*300 200*250 3.75 300*1000 400*900 500*800 600*700 650*650
    1.4 5.5-6.3 4.5-4.75
    1.5 7.5-7.75 5.5-6.3 9.5-9.75
    1.7 9.5-9.75 7.5-7.75 11.5-11.75
    1.8 11.5-16 9.5-9.75 12-13.75
    2.0 60*160 80*140 100*120 2.50 11.5-11.75 XV-L
    2.2 2.75 13.5-30
    2.5-3.0 3.0-4.75 200*300 250*250 3.75 400*1000 500*900 600*800 700*700
    3.25-4.0 5.5-6.3 4.5-4.75
    25*50 30*50 30*60 40*40 40*50 40*60 50*50 1.3 7.5-7.75 5.5-6.3 9.5-9.75
    1.4 9.5-16 7.5-7.75 11.5-11.75
    1.5 75*150 2.50 9.5-9.75 12-13.75
    1.7 2.75 11.5-11.75 XV-L
    1.8 3.0-3.75 12-13.75
    2.0 4.5-4.75 15.5-30
    2.2 5.5-6.3 200*400 250*350 300*300 4.5-6.3 500*1000 600*900 700*800 750*750
    2.5-3.0 7.5-7.75 7.5-7.75 9.5-9.75
    3.25-4.0 9.5-16 9.5-9.75 11.5-11.75
    4.25-4.75 80*160 120*120 2.50 11.5-11.75 12-13.75
    5.0-5.75 2.75 12-13.75 XV-L
    5.75-6.3 3.0-4.75 15.5-30
    40*80 50*70 50*80 60*60 1.3 5.5-6.3 200*500 250*450 300*400 350*350 5.5-6.3 500*1100 600*900 700*800 750*750
    1.5 7.5-7.75 7.5-7.75 9.5-9.75
    1.7 9.5-9.75 9.5-9.75 11.5-11.75
    1.8 11.5-20 11.5-11.75 12-13.75
    2.0 100*150 2.50 12-13.75 XV-L
    2.2 2.75 15.5-30
    2.5-3.0 3.0-4.75 280*280 5.5-6.3 600*1100 700*1000 800*900 850*850
    3.25-4.0 5.5-6.3 7.5-7.75 9.5-9.75
    4.25-4.75 7.5-7.75 9.5-9.75 11.5-11.75
    5.0-6.0 9.5-9.75 11.5-11.75 12-13.75
    40*100 60*80 70*70 1.3 11.5-20 12-13.75 XV-L
    1.5 100*200 120*180 150*150 2.50 15.5-30
    1.7 2.75 350*400 300*450 7.5-7.75 700*1100 800*1000 900*900
    1.8 3.0-7.75 9.5-9.75 11.5-11.75
    2.0 9.5-9.75 11.5-11.75 12-13.75
    2.2 11.5-20 12-13.75 XV-L
    2.5-3.0 100*250 150*200 3.00 15.5-30
    3.25-4.0 3.25-3.75 200*600 300*500 400*400 7.5-7.75 800*1100 900*1000 950*950
    4.25-4.75 4.25-4.75 9.5-9.75 11.5-11.75
    5.0-6.3 9.5-9.75 11.5-11.75 12-13.75
    50*100 60*90 60*100 75*75 80*80 1.3 11.5-11.75 12-13.75 XV-L
    1.5 12.25 15.5-40
    1.7 140*140 3.0-3.75 300*600 400*500 400*400 7.5-7.75 900*1100 1000*1000 800*1200
    1.8 4.5-6.3 9.5-9.75
    2.0 7.5-7.75 11.5-11.75 XX-LX
    2.2 9.5-9.75 12-13.75
    2.5-3.0 11.5-25 15.5-40
    3.25-4.0 160*160 3.00 400*600 500*500 9.5-9.75 1100*1000 1100*1100
    4.25-4.75 3.5-3.75 11.5-11.75 XX-LX
    5.0-5.75 4.25-7.75 12-13.75
    7.5-8 9.5-25 15.5-40

    COMMODA PRODUCTI

    01 Analysis indicis functionis tubi quadrati - bona plasticitas

    Plasticitas ad facultatem materiarum metallicarum refertur ad deformationem plasticam (deformationem permanentem) sine damno sub onere producendam.

    20210419092150402
    20210419092141230
    • 02 Analysis indicis functionis tubi quadrati - alta duritia

    Durities est index ad duritiem materiarum metallicarum metiendam. Hodie, methodus mensurae duritiei in productione usitatissima est methodus duritiae indentationis, quae indentatore forma geometrica certa utitur ad superficiem materiae metallicae sub certo onere examinandae premendam, et valorem duritiae secundum gradum indentationis determinat.

    Methodi communes includunt duritia Brinell (HB), duritia Rockwell (HRA, HRB, HRC) et duritia Vickers (HV).

    3 CERTIFICATIO EST
    COMPLETUM
    potest producere producta tuborum ferreorum mundi
    norma, qualis est norma Europaea, norma Americana,
    Norma Iaponica, norma Australiana, norma nationalis
    et cetera.

    JIS-G3466-Tubus Quadratus Chalybis Carbonis-ad-Usus-Structurales-Generalis-4
    20210419092703246

    04 Analysis indicis perfunctionis tubi quadrati - bona tenacitate impacti
    Onus in machinam magna celeritate agens onus impactus appellatur, et facultas metalli ad damnum sub onere impactus resistendum tenacitas impactus appellatur.

    PRODUCTA CALIDA

    1-1
    1-5
    1-2
    1-6
    1-3
    1-4
    1-8

    CERTIFICATUM EXHIBITIO

    quinque

    EXHIBITIO INSTRUMENTORUM

    sex

    LABORATORIUM INDEPENDENS

    VIRES NOSTRAE

    SOLA

    Fabricator tuborum rectangularium inter decem optimas marcas tuborum ferreorum in Sinis electus

    quattuor

    PROPORTIO QUALIFICATA PRODUCTORUM >100%

    INVOLUCRUM

    2de70b33c3a6521eefdad7dc10bb9b9
    c0e330415c82735f94d3c25ac387c7d
    f3f479dc4464d16602944db088824e4
    453178610663829382b8b7cbbfe9b9e

    Quaestiones Frequentes

    Q1: Esne societas mercatoria an fabricator?

    A: Officina sumus.

    Q2: Quamdiu est tempus traditionis tuae?

    A: Generaliter quinque ad decem dies sunt si merces in promptu sunt. Vel triginta dies si merces non in promptu sunt, secundum quantitatem.

    Q3: Exempla praebetisne? Gratis an extra?

    A: Ita, exemplum gratis offerre possumus cum sumptu vecturae a cliente soluto.

    Q4: Quae sunt condiciones solutionis tuae?

    A: Solutio <=1000USD, 100% antea. Solutio >=1000USD, 30% T/T antea, reliquum ante navem. Si aliam quaestionem habes, libenter nobiscum communicare potes ut infra.

  • Praecedens:
  • Deinde:

    • Societas magni aestimat qualitatem productorum, magnopere in introductionem apparatuum et peritorum provectorum investit, et omni ope nititur ut necessitatibus clientium domi et in terris externis satisfaciat.
    Contenta grosse dividi possunt in: compositionem chemicam, limitem cessionis, limitem tensile, proprietatem impactus, et cetera.
    Simulenter, societas etiam detectionem vitiorum et recoctionem aliasque curationes caloris in linea secundum necessitates emptorum perficere potest.

    https://www.ytdrintl.com/

    Litterae Electronicae:sales@ytdrgg.com

    Tianjin YuantaiDerun Societas Fabricationis Tuborum Ferreorum, Ltd.officina tuborum ferreorum est ab probataEN/ASTM/ JISin productione et exportatione omnium generum tuborum quadratorum rectangularium, tuborum galvanizatorum, tuborum ERW sudatorum, tuborum spiralium, tuborum arcu submersorum sudatorum, tuborum sutura recta, tuborum sine suturis, spiralium chalybis colore obductarum, spiralium chalybis galvanizatorum, aliorumque productorum chalybis specializata. Cum commoda vectura, 190 chiliometra ab Aëroporto Internationali Capitali Pechinensi et 80 chiliometra a Xingang Tianjin distat.

    Whatsapp: +8613682051821

    Mitte nobis nuntium tuum:

    Nuntium tuum hic scribe et nobis mitte.

    PRODUCTA CONNEXA

    Praesentatio rationum principalium

    • ACS-1
    • cnECGroup-1
    • cnmnimetalscorporation-1
    • crcc-1
    • cscec-1
    • csg-1
    • cssc-1
    • Daewoo-1
    • dfac-1
    • duoweiuniongroup-1
    • Fluor-1
    • structura-chaleis-1
    • samsung-1
    • sembcorp-1
    • sinomach-1
    • SKANSKA-1
    • snptc-1
    • strabag-1
    • TECHnip-1
    • Vinci-1
    • zpmc-1
    • sany-1
    • bilfinger-1
    • Bechtel-1-logo