Tubus involucri API 5CT SMLS K55-N80

Tubus involucri API 5CT SMLS K55-N80 Imago Praecipua
  • Tubus involucri API 5CT SMLS K55-N80
  • Tubus involucri API 5CT SMLS K55-N80
  • Tubus involucri API 5CT SMLS K55-N80
  • Tubus involucri API 5CT SMLS K55-N80
  • Tubus involucri API 5CT SMLS K55-N80

Descriptio Brevis:

Commodum:
1. Centum per centum post venditionem qualitatis et quantitatis certitudo.
2. Procurator venditionum professionalis celeriter intra horas XXIV respondet.
3. Magna copia magnitudinum regularium.
4. Exemplum gratuitum 20cm altae qualitatis.
5. Magna facultas producendi et fluxus capitalis.

  • Norma:API 5L, ASTM, API 5CT, ASTM A106, ASTM A53
  • Crassitudo:0.5 - 60 mm
  • Diameter externus:10.3 - 2032mm
  • Applicatio:Tubus olei vel alia industria
  • Certificatio:API 5L, API 5CT
  • Tubus Specialis:Tubus API
  • Tolerantia:±10% prout requiritur
  • Officium Processus:Soldatura, Sectio
  • Commodum:Alta Efficacia
  • Gradus:Gradus A, Gradus B, Gradus C, X42, X52, X60, X65, X70
  • Forma Sectionis:Rotundus
  • Locus Originis:Tianjin China
  • Ars:Calido Laminatum
  • Curatio Superficiei:Pictura nigra
  • Mixtura An Non::Non-Mixtum
  • Secundarius an non:Non secundarius
  • Modus solutionis:TT/LC
  • Longitudo:5.8m, 6m, 11.8m, 12m vel prout requiritur
  • Traditio:VII-XXX dies
    • Deprime ut PDF

    Detalia Producti

    QUALITATIS CONTROLUS

    RESPONDE

    VIDEO CONNEXUM

    Etiquettae Productarum

    Secundum normam API SPEC 5CT1988 editionem primam Instituti Petrolei Americani, genus chalybis tubi olei API 5CT in decem genera dividi potest, inter quae H-40, J-55, K-55, N-80, C-75, L-80, C-90, C-95, P-110 et Q-125. Tubos olei et tubas olei API 5CT K55 cum filo et copula praebemus, vel productum nostrum secundum formas sequentes ad optionem offerimus.

    If you are interested in API 5CT K55 Casing Tubing, we will supply you with the best price based on the highest quality, welcome everyone to cantact us,E-mail:sales@ytdrgg.com,and Remote factory inspection or factory visit

     

    Specificationes Tuborum Involucri API 5CT K55

    SPECIFICATIONES TUBORUM INTEGUMENTORUM API 5CT K55
    OD 10.3mm-2032mm
    Normae API 5CT, API 5L, ASTM A53, ASTM A106
    Ambitus Longitudinis 3-12M vel secundum requisitum clientis
    Gradus Chalybis (Genera Involucri, Genera Tuborum) Gradus A, Gradus B, Gradus C, X42, X52, X60, X65, X70
    Genus Fili Cochleae Extremum filum non perturbatum (NUE), extremum filum perturbatum externum (EUE)
    Specialitates
    • Obductio ad specificationes emptoris
    • Perturbatio externa
    • Copulae – EUE, AB Modificatae, deorsum curvatae, copulae cum amplitudine speciali
    • Articuli Catuli
    • Tractatio caloris
    • Examinatio Hydrostatica
    • Fluctus (per totam longitudinem, vel tantum finem)
    • Plenae facultates inspectionis a tertia parte (EMI, SEA, et Weld Line)
    • Filatio
    Finis Perficiendi Extremitates Externae Perturbationis (EUE), Articulatio Aequa, PH6 (et nexus aequivalentes), Articulatio Integralis (IJ)

     

    API 5CT K55 Tuborum Involucri Tensile et Duritiae Requisita

    Grex Gradus Typus Elongatio totalis sub onere % Robur cessionis MPa Robur tensile minimum MPa Duritia ad maximum. Crassitudo parietis specificata mm Variatio duritiae permissa b HRC
    min. maximus HRC HBW
    1 2 3 4 5 6 7 8 9 10 11
    1
    H40
    -
    0.5
    276
    552
    414
    -
    -
    -
    -
    J55
    -
    0.5
    379
    552
    517
    -
    -
    -
    -
    K55
    -
    0.5
    379
    552
    DCLV
    -
    -
    -
    -
    N80
    1
    0.5
    552
    758
    DCLXXXIX
    -
    -
    -
    -
    N80
    Q
    0.5
    552
    758
    DCLXXXIX
    -
    -
    -
    -
    R95
    -
    0.5
    DCLV
    758
    DCCXXIV
    -
    -
    -
    -
    2
    M65
    -
    0.5
    448
    586
    586
    22
    235
    -
    -
    L80
    1
    0.5
    552
    DCLV
    DCLV
    23
    241
    -
    -
    L80
    9Cr
    0.5
    552
    DCLV
    DCLV
    23
    241
    -
    -
    L80
    13Cr
    0.5
    552
    DCLV
    DCLV
    23
    241
    -
    -
    C90
    1
    0.5
    DCXXI
    DCCXXIV
    DCLXXXIX
    25.4
    255
    ≤ 12.70 12.71 to 19.04 19.05 to 25.39 ≥ 25.40
    3.0 4.0 5.0 6.0
    T95
    1
    0.5
    DCLV
    758
    DCCXXIV
    25.4
    255
    ≤ 12.70 12.71 to 19.04 19.05 to 25.39 ≥ 25.40
    3.0 4.0 5.0 6.0
    C110
    -
    0.7
    758
    DCCCXXVIII
    DCCXCIII
    30
    286
    ≤ 12.70 12.71 ad 19.04 19.05 ad 25.39. ≥ 25.40
    3.0 4.0 5.0 6.0
    3
    P110
    -
    0.6
    758
    965
    DCCCLXII
    -
    -
    -
    -
    4
    Q125
    1
    0.65
    DCCCLXII
    1034
    931
    b
    -
    ≤ 12.70 12.71 ad 19.04 ≥ 19.05
    3.0 4.0 5.0
    aIn casu controversiae, methodus referentialis adhibenda est probatio duritiae Rockwell C laboratorio facta.
    bNulli limites duritiae specificantur, sed maxima variatio secundum 7.8 et 7.9 API Spec. 5CT restringitur.

     

    Dimensiones Tuborum Involucri K55

    Magnitudines Tuborum Tubarium, Magnitudines Tuborum Petrolei et Magnitudines Tuborum Drift
    Diameter Externus (Magnitudines Tuborum Involucri) 4 1/2"-20", (114.3-508mm)
    Magnitudines Involucri Standardis 4 1/2"-20", (114.3-508mm)
    Typus Fili Involucrum filum fulcri, involucrum filum rotundum longum, involucrum filum rotundum breve
    Functio Tubum protegere potest.

    Tubus Olei pro Industriis Petrolei et Gasis Naturalis

    Nomen Tuborum Specificatio Gradus Chalybis Norma
    D (S) (L)
    (mm) (mm) (m)
    Tubus Tubi Petrolei 127-508 5.21-16.66 VI-XII J55M55.K55.
    L80. N80P110.    		 Specificatio API 5CT (8)
    Tubi Petrolei 26.7-114.3 2.87-16.00 VI-XII J55. M55. K55.
    L80. N80. P110.    		 Specificatio API 5CT (8)
    Copulatio 127-533.4 12.5-15 VI-XII J55. M55. K55.
    L80. N80. P110.    		 Specificatio API 5CT (8)

     

    Proprietates Tuborum Involucri API 5CT K55

    • Tubi involucri API 5CT K55 cum longitudine libera ab 8m ad 13m secundum normam SY/T6194-96 offeruntur. Attamen etiam longitudine non minore quam 6m praesto sunt, et eius quantitate non plus quam 20% esse debet.
    • Deformationes supra memoratae in superficie exteriori copulae tuborum involucri API 5CT K55 apparere non permittuntur.
    • Quaevis deformatio, qualis est capillatura, separatio, plica, fissura vel crusta, non est acceptabilis in superficiebus tam internis quam externis producti. Haec omnia vitia omnino removenda sunt et profunditas remota non excedere debet 12.5% ​​crassitudinis parietis nominalis.
    • Superficies fili copulae et tubi involucri API 5CT K55 laevigata esse debet, sine ullis laminis, scissuris, aut aliis vitiis quae negative afficere possint firmitatem et coniunctionem artam.

     

    Operatoribus olei et gasi magni momenti est ut involucra puteorum productionis a corrosione protectione cathodica protegant, et tubi API 5CT OilField imprimis ad translationem olei et gasorum serviunt.

     

    API 5CT Gradus K55 Tuborum Involucri Chalybis Color Code

    Nomen J55 K55 N80-1 N80-Q L80-1 P110
    Involucrum fascia viridis clara duae fasciae virides clarae fascia rubra clara fascia rubra clara + fascia viridis fascia rubra + fascia fusca fascia alba clara
    Copulatio copulatio viridis integra + fascia alba copulatio viridis tota tota rubra copulatio tota rubra copula + fascia viridis tota copulatio rubra + fascia fusca tota alba copulatio

     

    Specificationes tubi involucri ISO/API / API 5CT K55

    Codea Diametros Exteriores Pondus nominale
    (cum filo et
    copulatio) b,c    		 Crassitudo muri Genus processus finis
    mm kg/m² mm H40 J55 M65 L80 N801 C90d P110 Q125d
    In Librae/pedes K55 C95 N80Q T95d
    1 2 3 4 5 6 7 8 9 10 11 12 13
    4-1-2 9.5 114.3 14.14 5.21 S S S - - - - -
    4-1-2 10.5 114.3 15.63 5.69 - SB SB - - - - -
    4-1-2 11.6 114.3 17.26 6.35 - SLB - LB LB - LB -
    4-1-2 13.5 114.3 20.09 7.37 - - LB - LB - - -
    4-1-2 15.1 114.3 22.47 8.56 - - - - - - LB LB
    5 11.5 127 17.11 5.59 - S S - - - - -
    5 13 127 19.35 6.43 - SLB SLB - - - - -
    5 15 127 22.32 7.52 - SLB LB - - - LB -
    5 18 127 26.79 9.19 - - LB - LB - - LB
    5 21.4 127 31.85 11.1 - - LB - LB - - LB
    5 23.2 127 34.53 12.14 - - - LB - - - LB
    5 24.1 127 35.86 12.7 - - - LB - - - LB
    5-1-2 14 139.7 20.83 6.2 S S S - - - - -
    5-1-2 15.5 139.7 XXIII.VII 6.98 - SLB SLB - - - - -
    5-1-2 17 139.7 25.3 7.72 - SLB LB - - LB - -
    5-1-2 20 139.7 29.76 9.17 - - LB - LB - - -
    5-1-2 23 139.7 34.23 10.54 - - - LB - LB - -
    VI-V-VIII 20 168.28 29.76 7.32 S SLB SLB - - - - -
    VI-V-VIII 24 168.28 35.72 8.94 - SLB LB - - LB - -
    VI-V-VIII 28 168.28 41.67 10.59 - - - - LB - LB -
    VI-V-VIII 32 168.28 47.62 12.06 - - - LB LB
    7 17 177.8 25.3 5.87 S - - - - - - -
    7 20 177.8 29.76 6.91 S S S - - - - -
    7 23 177.8 34.23 8.05 - SLB LB LB - -
    7 26 177.8 38.69 9.19 - SLB LB LB -
    7 29 177.8 43.16 10.36 - - LB LB -
    7 32 177.8 47.62 11.51 - - LB LB LB -
    7 35 177.8 52.09 12.65 - - - LB LB LB
    VII-V-VIII 24 193.68 35.72 7.62 S - - - - - - -
    VII-V-VIII 26.4 193.68 39.29 8.33 - SLB LB LB -
    VII-V-VIII 29.7 193.68 44.2 9.52 - - LB LB -
    VII-V-VIII 33.7 193.68 50.15 10.92 - - LB LB -
    VII-V-VIII 39 193.68 58.04 12.7 - - - LB LB
    VII-V-VIII 42.8 193.68 63.69 14.27 - - - LB LB LB
    VII-V-VIII 45.3 193.68 67.41 15.11 - - - LB LB LB
    VII-V-VIII 47.1 193.68 70.09 15.88 - - - LB LB LB
    VIII-V-VIII 24 219.08 35.72 6.71 - S S - - - - -
    VIII-V-VIII 28 219.08 41.67 7.72 S - S - - - - -
    VIII-V-VIII 32 219.08 47.62 8.94 S SLB SLB - - - - -
    VIII-V-VIII 36 219.08 53.57 10.16 - SLB SLB LB LB -
    VIII-V-VIII 40 219.08 59.53 11.43 - - LB LB -
    VIII-V-VIII 44 219.08 65.48 12.7 - - - LB LB
    VIII-V-VIII 49 219.08 72.92 14.15 - - - LB LB LB

     

    Tubus involucri API 5CT Codea Diametros exterior tubi involucri API 5CT Tubus involucri API 5CT Pondus nominale
    (cum filo)
    et copulatio) b,c    		 Crassitudo parietis tubi involucri API 5CT Typus processus finis tubi involucri API 5CT
    mm kg/m² mm H40 J55 M65 L80 N80 C90d P110 Q125d
    In Librae/pedes K55 C95 1, Q. T95d
    1 2 3 4 5 6 7 8 9 10 11 12 13
    9-5-8 32.3 244.48 48.07 7.92 S - - - - - - -
    9-5-8 36 244.48 53.57 8.94 S SLB SLB - - - - -
    9-5-8 40 244.48 59.53 10.03 - SLB SLB LB LB LB - -
    9-5-8 43.5 244.48 64.73 11.05 - - LB LB LB LB LB -
    9-5-8 47 244.48 69.94 11.99 - - LB LB LB LB LB LB
    9-5-8 53.5 244.48 79.62 13.84 - - - LB LB LB LB LB
    9-5-8 58.4 244.48 86.91 15.11 - - - LB LB LB LB LB
    10-3-4 32.75 273.05 48.74 7.09 S - - - - - - -
    10-3-4 40.5 273.05 60.27 8.89 S SB SB - - - - -
    10-3-4 45.5 273.05 67.71 10.16 - SB SB - - - - -
    10-3-4 51 273.05 75.9 11.43 - SB SB SB SB SB SB -
    10-3-4 55.5 273.05 82.59 12.57 - - SB SB SB SB SB -
    10-3-4 60.7 273.05 90.33 13.84 - - - - - SB SB SB
    10-3-4 65.7 273.05 97.77 15.11 - - - - - SB SB SB
    XI-III-IV 42 298.45 62.5 8.46 S - - - - - - -
    XI-III-IV 47 298.45 69.94 9.53 - SB SB - - - - -
    XI-III-IV 54 298.45 80.36 11.05 - SB SB - - - - -
    XI-III-IV 60 298.45 89.29 12.42 - SB SB SB SB SB SB SB
    XIII-III-VIII 48 339.72 71.43 8.38 S - - - - - - -
    XIII-III-VIII 54.5 339.72 81.1 9.65 - SB SB - - - - -
    XIII-III-VIII 61 339.72 90.78 10.92 - SB SB - - - - -
    XIII-III-VIII 68 339.72 101.19 12.19 - SB SB SB SB SB SB -
    XIII-III-VIII 72 339.72 107.15 13.06 - - - SB SB SB SB SB
    16 65 406.4 96.73 9.53 S - - - - - - -
    16 75 406.4 111.61 11.13 - SB SB - - - - -
    16 84 406.4 125.01 12.57 - SB SB - - - - -
    XVIII-V-VIII 87.5 473.08 130.21 11.05 S SB SB - - - - -
    20 94 508 139.89 11.13 SL SLB SLB - - - - -
    20 106.5 508 158.49 12.7 - SLB SLB - - - - -
    20 133 508 197.93 16.13 - SLB - - - - - -
    S-Filum rotundum breve, L-Filum rotundum longum, B-Filum contrafulcimenti
    a. Codex ad ordinationem referentiae adhibetur.
    b. Pondus nominale involucri filetati et coniuncti (columna 2) ad referentiam tantum monstratur.
    c. Chalybs chromatus martensiticus (L80 9Cr et 13Cr) a chalybe carbonico densitate differt. Pondus chalybis chromati martensitici monstratum non est valor exactus. Factor correctionis massae 0.989 adhiberi potest.
    d. Involucra chalybis qualitatis C90, T95 et Q125 secundum specificationem, pondus et crassitudinem parietis in tabula vel ordine supra scriptas suppeditanda sunt.

     

    Compositio Chemica API 5CT K55

    Grex Gradus Typus C Mn Mo Cr Ni max. Cu max. P maximus. S maximus. Si max.
    min. maximum min. maximum min. maximum min. maximum
    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
    1 H40 - - - - - - - - - - - 0.03 0.03 -
    J55 - - - - - - - - - - - 0.03 0.03 -
    K55 - - - - - - - - - - - 0.03 0.03 -
    N80 1 - - - - - - - - - - 0.03 0.03 -
    N80 Q - - - - - - - - - - 0.03 0.03 -
    R95 - - 0.45°C - 1.9 - - - - - - 0.03 0.03 0.45
    2 M65 - - - - - - - - - - - 0.03 0.03 -
    L80 1 - 0.43 a - 1.9 - - - - 0.25 0.35 0.03 0.03 0.45
    L80 9Cr - 0.15 0.3 0.6 0.9 1.1 8 10 0.5 0.25 0.02 0.01 1
    L80 13Cr 0.15 0.22 0.25 1 - - 12 14 0.5 0.25 0.02 0.01 1
    C90 1 - 0.35 - 1.2 0.25 miliarda 0.85 - 1.5 0.99 - 0.02 0.01 -
    T95 1 - 0.35 - 1.2 0.25 d 0.85 0.4 1.5 0.99 - 0.02 0.01 -
    C110 - - 0.35 - 1.2 0.25 1 0.4 1.5 0.99 - 0.02 0.005 -
    3 P110 e - - - - - - - - - - 0.030 e 0.030 e -
    4 Q125 1 - 0.35 1.35 - 0.85 - 1.5 0.99 - 0.02 0.01 -
    a Contentum carbonis pro L80 usque ad 0.50% maximum augeri potest si productum oleo extinctum est.
    b Contentum molybdeni pro Gradu C90 Typo 1 nullam tolerantiam minimam habet si crassitudo parietis minor quam 17.78 mm est.
    c Contentum carbonis pro R95 usque ad 0.55% maximum augeri potest si productum oleo extinguatur.
    d Contentum molybdeni pro T95 Typo 1 ad minimum 0.15% reduci potest si crassitudo parietis minor quam 17.78 mm est.
    e Pro EW Grade P110, contentum phosphori erit maximum 0.020% et contentum sulphuris maximum 0.010%.
    NL = nullus limes. Elementa demonstrata in analysi producti referri debent.

     

    Proprietates Mechanicae API 5CT k55 Gr.

    API 5CT Involucri Norma Typus Robur Tensile Involucri API 5CT
    MPa    		 Robur Cedendi Involucri API 5CT
    MPa    		 Duritia Involucri API 5CT
    Maximus
    API SPEC 5CT J55 ≥517 379 ~ 552 ----
    K55 ≥517 ≥655 ---
    N80 ≥689 552 ~ 758 ---
    L80(13Cr) ≥655 552 ~ 655 ≤241HB
    P110 ≥862 758 ~ 965 ----
  • Praecedens:
  • Deinde:

    • Societas magni aestimat qualitatem productorum, magnopere in introductionem apparatuum et peritorum provectorum investit, et omni ope nititur ut necessitatibus clientium domi et in terris externis satisfaciat.
    Contenta grosse dividi possunt in: compositionem chemicam, limitem cessionis, limitem tensile, proprietatem impactus, et cetera.
    Simulenter, societas etiam detectionem vitiorum et recoctionem aliasque curationes caloris in linea secundum necessitates emptorum perficere potest.

    https://www.ytdrintl.com/

    Litterae Electronicae:sales@ytdrgg.com

    Tianjin YuantaiDerun Societas Fabricationis Tuborum Ferreorum, Ltd.officina tuborum ferreorum est ab probataEN/ASTM/ JISin productione et exportatione omnium generum tuborum quadratorum rectangularium, tuborum galvanizatorum, tuborum ERW sudatorum, tuborum spiralium, tuborum arcu submersorum sudatorum, tuborum sutura recta, tuborum sine suturis, spiralium chalybis colore obductarum, spiralium chalybis galvanizatorum, aliorumque productorum chalybis specializata. Cum commoda vectura, 190 chiliometra ab Aëroporto Internationali Capitali Pechinensi et 80 chiliometra a Xingang Tianjin distat.

    Whatsapp: +8613682051821

    Mitte nobis nuntium tuum:

    Nuntium tuum hic scribe et nobis mitte.

    PRODUCTA CONNEXA

    Praesentatio rationum principalium

    • ACS-1
    • cnECGroup-1
    • cnmnimetalscorporation-1
    • crcc-1
    • cscec-1
    • csg-1
    • cssc-1
    • Daewoo-1
    • dfac-1
    • duoweiuniongroup-1
    • Fluor-1
    • structura-chaleis-1
    • samsung-1
    • sembcorp-1
    • sinomach-1
    • SKANSKA-1
    • snptc-1
    • strabag-1
    • TECHnip-1
    • Vinci-1
    • zpmc-1
    • sany-1
    • bilfinger-1
    • Bechtel-1-logo